ABB HT604133 Original Operation Manual

Operation Manual / 4 Product description / A130-H.. - A140-H
8 Dismantling and fitting / 8.2 Weights of individual parts
© Copyright 2020 ABB. All rights reserved. HZTL4030_EN Rev.F February 2020
¡ Assembly device
Devices that are fitted on the turbocharger in order to obtain a suspension point. As-
sembly devices are specially constructed and designed for the defined use; they are not
commercially available products. Use assembly devices only for the described applica-
tions.
¡ Lifting gear
Equipment for the lifting and transporting of loads (ropes, chain block, crane). Lifting
gear is not supplied by ABB.
Swivel lifting eyes to be used
Swivel lifting eyes are required for the safe lifting of loads, which are not supplied by ABB.
Fig.26: Swivel lifting eyes
Product Thread M Length L
[mm]
Minimum load limit
[kg]
Quantity
A130 M10 17 mm 100 kg 2
A135 M10 17 mm 150 kg 2
A140 M12 21 mm 250 kg 2
Table30: Swivel lifting eyes
Ring nuts to be used
Two ring nuts (M16) are required for safer lifting of the cartridge group, which are not in-
cluded in the ABB Turbo Systems scope of delivery.
Fig.27: Starpoint ring nut VRM
8.2 Weights of individual parts
The specified weights of the individual parts or assemblies are rounded-up standard values.
Page 60 / 93

ABB HT604133 Specifications

General

Brand	ABB
Model	HT604133
Category	Industrial Equipment
Language	English