Operation Manual / TPS44-H.. - TPS52-H..
 Tables
© Copyright 2021 ABB. All rights reserved. HZTL4037_EN Revision F May 2021
  Tables
Table1: Definition of pictograms ............................... 9
Table2: Personal protective equipment to be worn
at all times ...................................................................... 13
Table3: Personal protective equipment to be worn
specific to the respective task ................................... 13
Table4: Gesamtgewicht ............................................. 28
Table5: Swivel lifting eyes to be used ..................... 28
Table6: Requirements for threaded rods ................ 32
Table7: Tightening torque for standard nuts......... 33
Table8: Lubricating oil pressure at oil inlet before
turbocharger ................................................................. 38
Table9: Lubricating oil temperature at the inlet... 40
Table10: Lubricating oil temperature at the outlet....
40
Table11: Tightening torque(86505) ........................ 44
Table12: Expected replacement intervals................ 51
Table13: Maintenance table....................................... 53
Table14: Dimensions of the cleaning container .... 59
Table15: Malfunctions when starting – Delayed
start-up .......................................................................... 63
Table16: Malfunctions when starting – Vibrations 63
Table17: Malfunctions when starting - Rotating
parts rubbing ................................................................ 63
Table18: Malfunctions during operation – Lubricat-
ing oil pressure too low............................................... 64
Table19: Malfunctions during operation – Speed re-
duces............................................................................... 64
Table20: Malfunctions during operation – Speed in-
creases ........................................................................... 64
Table21: Malfunctions during operation – Exhaust
gas temperature too high .......................................... 65
Table22: Malfunctions during operation – Charge air
pressure too low........................................................... 65
Table23: Malfunctions during operation – Charge air
pressure too high......................................................... 66
Table24: Malfunctions during operation – Engine
performance losses ..................................................... 66
Table25: Malfunction – Turbocharger pumping.... 67
Table26: Malfunction – Sporadic surge blows....... 67
Table27: Malfunctions when stopping – Runout
noises............................................................................... 68
Table28: Malfunctions when stopping – Runout
time too short ................................................................ 68
Table29: Malfunction of the speed measurement
system – No signal or poor signal amplitude .......... 69
Table30: Malfunction of the speed measurement
system – Measured speed too high........................... 69
Table31: Malfunction of the speed measurement
system – Measured speed too low............................. 69
Table32: Swivel lifting eyes to be used...................... 71
Table33: Ring nuts to be used (VRM)........................ 72
Table34: Weights of the assemblies [kg]................. 73
Table35: Permissible clearances A and B ................. 81
Table36: Nozzle ring compression PD ...................... 82
Table37: Tightening torque (72041).......................... 83
Table38: Tightening torque (72011) .......................... 85
Table39: Tightening torque (51007) ......................... 87
Table40: Permissible clearances N and R ................ 89
Table41: Tightening torque (51008) ......................... 90
Table42: Tightening torque (72020) ......................... 91
Table43: Overview of tightening torques................ 92
Table44: Customer spare part set(97070) ............. 98
Table45: Spare parts - Cartridge ............................... 99
Table46: Spare parts - Bearing casing.................... 100
Table47: Spare parts - Rotor and Bearing parts... 101
Table48: Spare parts - Turbine casing.................... 102
Table49: Spare parts - Compressor casing ........... 103
Table50: Spare parts - Filter silencer...................... 104
Table51: Spare parts - Air suction branch radial... 105
Table52: Spare parts - Air suction brach axial....... 106
Table53: Spare parts - Gas outlet casing ............... 107
Table54: Spare parts - Speed measurement system .
108
Table55: TPS-H Tool ................................................... 109
Page 111 / 111Page 111 / 111