ABB IRB 1200-7/0.7 - Page 404

NoteAction
Protection cover for axis-6 turning
disk: 3HAC044666-001
For robots with protection type Foundry Plus
Check the protection cover for turning disk and
T40 variseal sealing.
2
T40 variseal sealing: 3HAC044641-
012
xx1600001126
Replace if damaged.
M2 variseal sealing: 3HAC044641-
008
xx1300002493
For robots with protection class IP67
For robots with protection type Foundry Plus
Check the sealing.
Replace if damaged.
CAUTION
Do not fit M2 variseal sealing on robots in other
protection class or protection types.
3
For robots not in protection type
Hygienic
Remove residual locking liquid and other pollut-
ants with cleaning agent Loctite 7063.
4
Flange sealant, SikaFlex 521FCApply flange sealing on the mounting surfaces of
the drive unit.
Note
For robots with protection type Clean Room
For robots with food grade lubrication
For robots with protection type Hygienic
Wipe clean the overflowing sealant if there is any.
For robots with protection type
Hygienic
Flange sealant, Trans Clear
xx1400001404
Continues on next page
404 Product manual - IRB 1200
3HAC046983-001 Revision: S
© Copyright 2014 - 2021 ABB. All rights reserved.
4 Repair
4.4.3 Replacing the tubular spare parts
Continued