ABB LMT100 - Selecting and Changing Parameters; Selecting a Parameter Value; Setting a Numerical Parameter; Exiting the Setup

LMT SERIES | MAGNETOSTRICTIVE LEVEL TRANSMITTER | OI/LMT100/200-EN REV.B
31
Selecting and changing parameters
Selecting a parameter value
1 Select the parameter you want to set in the menu
2 Press
to see the list of available parameters values. The
parameter value that is currently set is highlighted
3 Press or to select the required value
4 Press
to confirm your selection
Setting a numerical parameter
1 Select the parameter you want to set in the menu
2 Press
for parameter editing. The currently selected
position is highlighted
Exiting the setup
Values are mandatory for some menu items. Exit a menu
without parameter change as follows:
1 Press
repeatedly until the cursor reaches the end
positon. Press
once more to move cursor to lower right
corner where “Cancel” will be displayed.
2 Press
to terminate editing and exit the menu item.
Menu: Easy Setup
Language
Set PV
PV Unit
PV LRV
PV URV
PV Damping Time
Display 1 Line 1 View
Tag
The Easy Setup menu has multiple options that are available to
the user. These options are detailed below:
Language
The Language option enables the user to set various operating
languages to assist in the setup of the LMT Series transmitter.
When a specific language is selected, the titles of the menu
items are then converted to the selected language.
Abbreviations specific to the LMT Series transmitters remain
unchanged as icons, regardless of language selection.
The available languages are as follows:
English German
French Spanish
Italian Russian
Chinese Portuguese
Set PV (Primary Variable)
The Set PV option allows the user to select the PV (Primary
Variable) to Level, Distance/Ullage or Interface if the device is
configured for two levels.
PV Unit