ABB LMT100 - Menu: Calibrate

47
LMT SERIES | MAGNETOSTRICTIVE LEVEL TRANSMITTER | OI/LMT100/200-EN REV.B
Menu: Calibrate
Level Calibration
Interface
Calibration
Process
Temperature
Calibration
Temperature Offset
Reset Calibration
Calibration Point
Reset Calibration
Calibration Point
Reset Calibration
PV URV
PV LRV
4-20mA D/A Trim
4 mA Trim
20 mA Trim
Current Simulation
Reset D/A Trim
Menu/Parameter Value Range Description
Level Calibration
Calibration Points 
values range.
SVL – Sensor value at Level

In – Sensor value
Out – Level value
Reset Calibration Resets calibration points to factory defaults
Interface Calibration
Calibration Points 
values range.
SVI – Sensor value at Interface

In – Sensor value
Out – Level value
Reset Calibration Resets calibration points to factory defaults
Process Temp Calibration
Temperature Offset
Reset Calibration Resets calibration to factory defaults
4-20 mA D/A Trim
  
  
Current Simulatation  Sets current to user defined value
Reset D/A Trim Reset trim to factory defaults