41
Editing Points
STEP 1:
From Linearization menu, press
or to get to
Points submenu
Press
to Select/Enter the points submenu
IMPORTANT NOTE
Linearization points menu description
1 Current linearization point number (could be 00 – 20).
2 Current level being measured
3 Input Value for the current selected point
4 Output Value for the current selected point
• The scroll function accessed by pressing the
key
allows navigation
• between the point number “00”, the Input Value <In>,
or the Output Value <Out>.
• To change between points, press
or When
at “00” only
can be used, when at point “20” only
can be used, and for any other points
or can
be used.
• To edit the input or output value of the points press the
key when <In> or <Out> are highlighted respectively.
STEP 2:
Press
to highlight point number, if not already highlighted
Press
or to navigate to other point numbers
STEP 3:
Press
to scroll to the Input value <In>
There are two methods to edit:
a Press
to “capture” the current level value (LVL) and
assign it to the input value of this point
b Press
to manually enter in value
STEP 4:
Press
to scroll to Output value <Out>
Press
to enable the point
Press
to edit the output value of the point
STEP 5:
Press
to scroll to Output value <Out>
Press
to enable the point
Press
to edit the output value of the point
To Next Page
Loading...
