ABB LMT100 - Page 53

53
LMT SERIES | MAGNETOSTRICTIVE LEVEL TRANSMITTER | OI/LMT100/200-EN REV.B
Menu: Diagnostics (continued)
Menu/Parameter Value Range Description
Diagnostics/Waveform/At Sensor Ref Pt
At Sensor Ref Point Sets waveform screen at Sensor Reference Point
Diagnostics/Waveform/At Level
At Level Sets waveform screen at Level position
Diagnostics/Waveform/At Interface
At Interface Sets waveform screen at Interface position
Diagnostics/Waveform/At Distance/Distance
Distance Sets user defined distance
Diagnostics/Waveform/At Distance/Waveform
Waveform Graphical representation of
signal
Activate waveform at user defined distance
Diagnostics/Waveform/End of Probe
End of probe Sets waveform at end of probe
Diagnostics/Signal Polarity
Signal Polarity Standard, Flipped Sets orientation of waveform peak
Diagnostics/Simulation/Level Sim/Enable
Enable Enable, Disable Enable or disable level value simulation
Diagnostics/Simulation/Level Sim/Level-Sim
Level-Sim Level value in selected units Enable or disable level value simulation
Diagnostics/Simulation/Interface Sim/Enable
Enable Enable, Disable Enable or disable Interface value simulation
Diagnostics/Simulation/Interface Sim/Interface-Sim
Interface-Sim Interface value is selected units User defined Interface value
Diagnostics/Simulation/Distance-Ullage Sim/Enable
Enable Enable or disable Distance/Ullage value simulation
Diagnostics/Simulation/Distance-
Ullage Sim/Distance- Ullage-Sim
Distance-Ullage-Sim User defined Distance/Ullage value
Diagnostics/Simulation/Temperature Sim/Enable
Enable Enable, Disable Enable or disable Temperature value simulation
Diagnostics/Simulation/Temperature Sim/ Temperature-Sim
Temperature-Sim User defined Temperature value
Diagnostics/History/Diagnostic History
Diagnostics History Gives diagnostic error type, id, name, occurrences,
total active time, and time since last occurrence
Diagnostics/History/Clear Diag History
Clear Diag History Clears diagnostic history
Diagnostics/History/Electronics Temperature
Electronics Temperature Gives current temperature of electronics board
Diagnostics/History/Elec Temp Min
Elec Temp Minimum Gives minimum recorded temperature of electronics
board
Diagnostics/History/Elec Temp Max
Elec Temp Maximum Gives maximum recorded temperature of electronics
board
Diagnostics/History/Elec Temp Reset
Elec Temp Reset Erases recorded temperature values of electronics
board
Diagnostics/History/Process Temp
Process Temp Gives current temperature of process
only applicable when device equiped with sensor
RTD