ABB LMT100 - Page 60

60
LMT SERIES | MAGNETOSTRICTIVE LEVEL TRANSMITTER | OI/LMT100/200-EN REV.B
Menu: Device Info (continued)
Menu/Parameter Value Range Description
Serial Number
Serial Number 
Alphanumeric value

Indicates specific device identification number
Device Configuration
Device Configuration 




Defines the application use of the device, users
can change the measurement from single level to
two levels. However, if the device is not equipped
with an RTD, then the temperature option will not
be available.
Mount Orientation
Mount Orientation Top, Bottom
Default: Top
Physical mounting position of housing to probe.
Sensor
Sensor ID 
Type Magnetostrictive Device technology
Probe Length 
SW Version xx.xx.xx
HW Version xx.xx.xx
FPGA Version xx.xx.xx
Sensor Low Limit 

Sensor High Limit 

Sensor Offset 
Electronics
SW Version xx.xx.xx
HW Version xx.xx.xx
Display
SW Version xx.xx.xx
HW Version xx.xx.xx