LMT200 Cryogenic with insertion well - Top Mount
Vibration Isolator Mount Option
Kit Includes:
1 Vibration Isolator
1 Chamber mounting clamp assembly
2 Bearing clamp assemblies
For measurement lengths (ML) of 914.4 mm (36 in) or less, a
minimum of two VIKIT assemblies are recommended for
installation in high vibration applications.
For ML greater than 914.4 mm (36 in), the number of isolators
required can be determined from the below chart.
ML up to # of Kits
consult factory
To Next Page
Loading...
