ABB M4M 20 - Page 42

42 M4M 20 NETWORK ANALYZER USER MANUAL
CT ratio menu
During the first commissioning, it is highly recommended to configure the CT ratio (please refer to chapter
“7.5.CT ratio”).
→ → Installation → CT ratio
VT ratio
Type of network
LED Source
CT ratio
Installation
VT ratio menu
During the first commissioning it is mandatory to configure the VT ratio (please refer to chapter “7.6.VT ratio”).
→ → Installation → VT ratio
Installation
VT ratio
Type of network
LED Source
CT ratio
Type of network menu
During the first commissioning, it is highly recommended to configure the Type of network (please refer
to chapter “7.4.Type of network”).
→ → Installation → Type of Network
Installation
VT ratio
Type of network
LED Source
CT ratio