48 M4M 20 NETWORK ANALYZER USER MANUAL
8.5.Communication
→
→
Communication
Communication menu allow to set all the parameters related to the communication protocol available
for a specific product version. The embedded communication protocol varies according to the different
product versions. Please refer to “3.3. Versions” for the details on the embedded communication
protocols.
Based on product version following configuration menus are available:
Bluetooth (all M4M 20 product versions)
Bluetooth communication protocol is available on all product version and allow to read data via EPiC
Mobile from M4M and carry out basic configuration.
→ → Communication → Bluetooth
Enable / Disable
Start pairing
Menu Description
Enable/Disable
Enable / disable bluetooth communication. Disabled by default.
Start paring Starts the paring, only if Bluetooth communication is enabled.
When the Bluetooth communication is enabled, the communication active symbol appears.
When Start pairing is selected, in order to complete the pairing with EPiC Mobile, due to Cybersecurity
reasons it is needed to enter a passkey on your smartphone. The following screen will appear, followed by
a passkey randomly generated by M4M.
EPIC
is connected via Bluetooth
OK
Passkey
Alarms
To Next Page
Loading...
