60 M4M 20 NETWORK ANALYZER USER MANUAL
9.7.I/O
The number and type of I/O on the M4M network analyzer varies according to the different product
versions. Please refer to the table in “3.4.Versions” for the detail of I/O types per each M4M.
For each I/O specific information is shown according to the I/O type. Below an example for digital output
set as pulse output
→
Data Reading
→
Data Reading
→
I/O
Type
Pulse output
Count 1321
I/O
Slot 1
Info visualized Description
Type How I/O slot has been configured.
Count
Number of pulses counted by the I/O. It is only available
if the I/O slot has been configured as Pulse input or Pulse
output.
State
Status of the I/O. It is only available if the I/O slot has
been configured as Pulse Output, Output ON, Output OFF
or Comm. output.
9.8.Notifications
→
Data Reading
→
Notifications
Notifications
Alarms
Warnings
Errors
All
Menu item Description
All
All alarms, warnings, errors displayed in chronological order
(latest first).
Alarms
User settable, related to specific parameters, threshold,
etc.
Warnings
Related to installation conditions and device settings.
Errors
Related to the device and to its self-diagnostics.
To Next Page
Loading...
