ABB M4M 20 - Other Settings

M4M 20 NETWORK ANALYZER USER MANUAL
51
8.6.Other settings
In this menu it is possible to configure the time interval for average values calculation, timers settings,
energy conversion parameters.
→ → Other settings
Average
Timers
Energy conversion
Other settings
Menu Description
Average Configuration of time interval for Average values.
Timers Configuration of count-down timer and timer reset.
Energy conversion Configuration of conversion factors for energy.
Average menu
In this menu it is possible to configure the time interval used for calculation of average parameters that
can be read out in Data reading -> Average. For the data reading of average values please refer to chapter
“9.4.Average”.
→ → Other settings → Average
15 min
Average
Time interval
Setting Description
Time interval Manual entry from 1 to 60m. Default: 15m