ABB M4M 20 - Page 52

52 M4M 20 NETWORK ANALYZER USER MANUAL
Timers menu
In this menu it is possible to configure the count-down timer, used for maintenance notification, and the
timers reset.
For the data reading of timers values please refer to chapter “9.10.Timers”.
→ → Other settings → Timers
365 00h : 00m
Countdown timer
Start time
Menu Description
Count-down timer Used for the count of the system operating time.
Timers reset Reset of the count-down timer
If countdown timer menu is chosen, the screen above will appear, allowing to manually enter the value in the
format days: hours: minutes.
Energy conversion menu
In this menu it is possible to configure the conversion factors in order to associate the consumption of
active energy to the local currency or to CO
2
.
For the data reading of converted values please refer to chapter “9.2.Energy”.
→ → Other settings → Energy conversion
Energy conversion
Currency/kWh
CO2/kWh
Menu Description
Currency/kWh
Currency conversion factor that allows to display the equivalent of
active 3-phase energy in local currency. Factor has to be defined as
currency/kWh.
CO2/kWh
CO
2
conversion factor that allows to display the equivalent of active
3-phase energy in CO2. Factor has to be defined as kg CO
2
/kWh.