62 M4M 20 NETWORK ANALYZER USER MANUAL
Warnings
→
Data Reading
→
Notifications
→
Warnings
V1 missing
l1 missing
l1 missing
l1 missing
Warnings
If one of the warnings is selected, timestamp (Day, Hour) will be shown. Day format is YYYY:MM:DD, time
format is hh:mm:ss.
Below the list of possible warnings:
• Not Locked device (only MID version)
• Negative power L1/L2/L3/Total
• Frequency out of the metering limit
• Date not set
• Time not set
• V2/V3 connected (and it is single-phase system)
• V1 missing
• V2/V3 missing (and it is not single-phase system)
• I1 missing
• I2/I3 missing (and it is not single-phase system)
• I2/I3 connected (and it is single-phase system)
• L1/L2/L3 connected to N
• I/O Pulse 1/2/3/4/5/6 merged pulse
• Power Fail
To Next Page
Loading...
