ABB Navigator 600 Silica - 5 Configuration; Configuration; Front Panel Controls; Navigation and Editing

Navigator 600 Silica
Single-stream 5 Configuration
IM/NAV6S/SS–EN Rev. E 23
5 Configuration
5.1 Front Panel Controls
a Menu Key – Displays or hides the context-sensitive
operator menu associated with each view. It also cancels
the menu without making a change or returns to the
previous menu level.
b Group Key – Toggles between the operator and log
screens.
Left Key – Scroll left.
c Up / Down Keys – Highlights menu items and
scrolls through previously recorded data.
d View Key – Toggles between the operator and graph
screens.
Right Key – Scroll right.
e Enter Key – Selects the highlighted menu item.
5.2 Navigation and Editing
Depending on the type of field to be edited, the software
provides a variety of methods for entering values.
5.2.1 Text Editing
If the field to be edited requires text, a keyboard is displayed:
To enter text, use the , , and keys to highlight the
required character and press .
There are three set of characters, uppercase, lowercase and
symbols. To toggle between each, highlight the bottom,
right-hand button and press .
To finish, highlight 'OK' and press , or press to exit
without making any changes.
5.2.2 Numeric Editing
If the field to be edited requires a numeric value, a number-pad
is displayed:
To enter a number, use the , , and keys to highlight
the required number and press .
To finish, highlight 'OK' and press , or press to exit
without making any changes.
Fig. 5.1 Front Panel Controls