Navigator 600 Silica
Single-stream 11 Alarm Acknowledge
IM/NAV6S/SS–EN Rev. E 59
10.5 Scales
Selects the scale to be used – see Section 5.4.2, page 33.
10.6 Trace Select
Applicable to multi-stream analyzers only.
11 Alarm Acknowledge
To acknowledge a particular alarm, use the and keys to
highlight it in the menu and press the key.
To acknowledge all active alarms simultaneously, select 'All' and
press the key.
Note. Active unacknowledged alarms are identified by a
flashing red alarm event icon. Active acknowledged alarms
are identified by a continuous red alarm event icon.
To Next Page
Loading...
