EasyManua.ls Logo

ABB Navigator 600 Silica - Cleaning Solutions

ABB Navigator 600 Silica
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Navigator 600 Silica
Single-stream 13 Specification
IM/NAV6S/SS–EN Rev. E 63
Environmental Data
Ambient Operating Temperature
5 to 45 ºC (41 to 113 ºF)
Sample Temperature
5 to 55 ºC (41 to 131 ºF)
Sample Particulate
<60 microns
<10 mgl
–1
Sample Flow Rate
>5 ml/min / <500 ml/min
Sample Pressure
Atmospheric
Storage Temperature
–20 to 75 ºC (–4 to 167 ºF)
Ambient Operating Humidity
Up to 95 % RH non-condensing
Electrical
Supply ranges
110 to 240 V max. AC 50/60 Hz ± 10 % (90 to 264 V AC, 45/65 Hz)
18 to 36 V DC 10 A power supply typical (optional)
Power consumption
75 W max. – AC
100 W max. – DC
Analog Outputs
6 isolated current outputs:
galvanically isolated (to 500 V DC) from each other and all other
circuitry
fully assignable and programmable over a 0 to 20 mA range
(up to 22 mA if required)
drives maximum 750 load
Wetted Materials
PMMA (acrylic)
PP (polypropylene)
PTFE
PP (20 % glass filled)
PEEK
NBR (nitrile)
EPDM
Santoprene
PTFE (15 % polysulphane)
NORYL
Borosilicate glass
Acrylic adhesive
Alarms / Relay Outputs
One per unit:
out-of-service alarm relay
calibration in progress alarm relay
calibration failed alarm relay
maintenance / hold alarm relay
Six per unit:
fully user-assignable and alarm relays
Rating
Connectivity / Communications
Ethernet connection
Bus communications
Profibus DP V1 (optional)
Data Handling, Storage and Display
Security
Storage
Removable Secure Digital (SD) card – maximum size 2 GB
Trend analysis
Local and remote
Data transfer
SD card or FTP
Approvals, Certification and Safety
Safety Approval
cULus
CE Mark
Covers EMC & LV Directives (including latest version EN 61010)
General Safety
EN 61010–1
Overvoltage Class 11 on inputs and outputs
Pollution category 2
EMC
Emissions & immunity
Meets requirements of IEC61326 for an Industrial Environment
DS/NAV6S-EN Rev. N
Voltage 250 V AC 30 V DC
Current 5 A AC 5 A DC
Loading (non-inductive) 1250 VA 150 W
Web server with ftp: for real time monitoring, configuration,
data file access and email capability
Multi-level security: user, configuration, calibration and
maintenance pages

Table of Contents

Related product manuals