ABB ProcessMaster FET632 - Parameterization Overview (Factory Settings)

137
FEM630 | ELECTROMAGNETIC FLOWMETER | OI/FEM630-EN REV. A
...15 Appendix

Parameter Value range Factory setting
Sensor Tag  None
Sensor Location Tag  None
 Depending on the nominal diameter of the sensor. Set to Q
max
DN in accordance with
Measuring range table on page

Unit Volumeflow Qv 
kg/s; kg/min; kg/h; kg/d; t/min; t/h; t/d
g/min
Unit Vol. Totalizer  Gallon (g)
Pulses per Unit  
Pulse Width  
Damping  
 Off, Binary output, Pulse output, Frequency output 
output for forward flow and
reverse flow
 
out of phase)

output for output of the flow
direction.
  
Curr.Out at Alarm  
  Off
Low flow cutoff  
Empty pipe detection On / Off Off