ABB PSTX 570 - Reset to Factory Defaults

20 Service PSTX720...840 | Service Manual | 1SFC13105M0201
3.2.3 Reset to factory defaults
1. Switch on the power supply (terminal 1 and 2).
2.
1
Press ”Menu” to reach Menu.
Use
or to navigate to Settings and then
press
”Select”.
3.
2
Use or to navigate to Reset to
defaults and then press
”Select”.
4.
3
Use or to navigate to Reset all
parameters and then press
”Select”.
5.
4
Following message will appear on the display:
Continue to reset all parameters to their default
values?
Press
”Yes” to reset all parameters
or
”No” if you whish to cancel the operation.
1
2
3
4
3