170 Product manual - PVS-175-TL;A.1 Version
EN
8.15 Storage and dismantling
8.15.1 Storage of the equipment or prolonged stop
If the equipment is not used immediately or is stored for long periods, check that it is correctly packed
and contact ABB for storage instructions.
The equipment must be stored in well-ventilated indoor areas having no characteristics that could damage
the components of the equipment.
Restarting after a long or prolonged stop requires a check and, in some cases, the removal of oxidation
and dust that will also have settled inside the equipment if not suitably protected.
8.15.2 Dismantling, decommissioning and disposal
ABB is not responsible for disposal of the equipment, or part of it, which does not take place on the basis
of the regulations and laws in force in the country of installation.
The symbol of the cancelled bin (where present) indicates that the product must not be disposed with
domestic waste at the end of its useful life.
This product must be delivered to the waste collection point of the local community for recycling.
For further information, refer to the public body responsible for waste disposal in the country.
Inappropriate disposal of waste can have a negative impact on the environment and human health owing
to potentially dangerous substances.
By cooperating in the correct disposal of this product, you contribute to the reuse, recycling and recovery
of the product, and the protection of our environment.
Dispose of the various types of materials that the parts of the equipment consist of in dumps that are
suitable for the purpose.
COMPONENT MATERIAL OF CONSTRUCTION
Frame, brackets, supports Arc-welded steel FE37, aluminium
Casing or covers ABS, plastic
Paint RAL
Gaskets and seals Rubber / Teflon / Viton
Electrical cables Copper / Rubber
Cable trays Polyethylene / Nylon
Batteries Nickel / Lead/ Lithium
To Next Page
Loading...
Need help?
General