ABB PVS-175-TL - Characteristics and Technical Data

22 Product manual - PVS-175-TL;A.1 Version
EN
3.5 Characteristics and technical data
3.5.1 Technical data
PVS-175-TL
INPUT
Absolute maximum input voltage (Vmax,abs) 1500 Vdc
Input start-up voltage (Vstart) 750 V (650 - 1000 V)
Input operating interval (Vdcmin...Vdcmax) 600 - 1500V
Rated input voltage (Vdcr) 1100 Vdc
Input nominal power(Pdcr) 188000 W @ 30°C - 177000 W @ 40°C
Number of independent MPPT 12
MPPT DC voltage range (VMPPTmin ... VMPPTmax) to Pacr 850 - 1350 Vdc
Maximum DC input power for each MPPT (Pmppt,max) 20000 W [850V≤VMPPT≤1350V]
Maximum DC input current for each MPPT (Idcmax) 22 A
Maximum short circuit current for each MPPT (Iscmax) 30 A
Maximum return current (AC side vs DC side) Negligible in normal operating conditions (1)
Number of DC input pairs for each MPPT 2
Type of input DC connectors PV quick fit connector
Type of photovoltaic panels that can be connected at
input according to IEC 61730
Class A
Input protection
Reverse polarity protection Yes, from current limited source
Input over voltage protection for each MPPT -
varistor (-S / -S2 models)
2
Input over voltage protection for each MPPT -
plug in modular surge arrester (-SX / -SX2 models)
2 (Type 2)
Photovoltaic array isolation control Yes, according to IEC 62109-2
Residual current monitoring device Yes, according to IEC 62109-2
DC switch rating for each MPPT 20 A/1500 V - 35 A/1250 V - 50 A/1000 V (2)
String current monitoring Input current monitoring per MPPT (12ch)
Arc fault protection Optional