ABB REF 610 - Page 131

131
Channel 2
Table 5.1.17.1.-8 Event codes E1...E16
Channel Event Description Weighting
factor
Default
value
2 E1 PO1 activated 1 1
2 E2 PO1 reset 2 1
2 E3 PO2 activated 4 0
2 E4 PO2 reset 8 0
2 E5 PO3 activated 16 0
2 E6 PO3 reset 32 0
2 E7 SO1 activated 64 0
2 E8 SO1 reset 128 0
2 E9 SO2 activated 256 0
2 E10 SO2 reset 512 0
2 E11 SO3 activated 1024 0
2 E12 SO3 reset 2048 0
2 E13 SO4 activated 4096 0
2 E14 SO4 reset 8192 0
2 E15 SO5 activated 16384 0
2 E16 SO5 reset 32768 0
Default value of event mask 2V155 3
Table 5.1.17.1.-9 Event codes E17...E26
Channel Event Description Weighting
factor
Default
value
2 E17 DI1 activated 1 0
2 E18 DI1 deactivated 2 0
2 E19 DI2 activated 4 0
2 E20 DI2 deactivated 8 0
2 E21 DI3 activated 16 0
2 E22 DI3 deactivated 32 0
2 E23 DI4 activated 64 0
2 E24 DI4 deactivated 128 0
2 E25 DI5 activated 256 0
2 E26 DI5 deactivated 512 0
Default value of event mask 2V156 0
Feeder Protection Relay
Technical Reference Manual
REF 610REF 610
1MRS755310