ABB REL 551-C1*2.5 - Page 122

113
Supervision of AC input quantities (DA) Chapter 8
Monitoring
EnDeadBP Off, On Off - Enable periodic dead band reporting S
Reporting of events to the station control
system (SCS) through LON port
:
EventMask U1 No Events,
Report Events
No Events - Enables (Report Events) or disables (No
Events) the reporting of events from channel
DA01 to the SCS
EventMask U2 No Events,
Report Events
No Events - Enables (Report Events) or disables (No
Events) the reporting of events from channel
DA02 to the SCS
EventMask U3 No Events,
Report Events
No Events - Enables (Report Events) or disables (No
Events) the reporting of events from channel
DA03 to the SCS
EventMask U4 No Events,
Report Events
No Events - Enables (Report Events) or disables (No
Events) the reporting of events from channel
DA04 to the SCS
EventMask U5 No Events,
Report Events
No Events - Enables (Report Events) or disables (No
Events) the reporting of events from channel
DA05 to the SCS
EventMask I1 No Events,
Report Events
No Events - Enables (Report Events) or disables (No
Events) the reporting of events from channel
DA06 to the SCS
EventMask I2 No Events,
Report Events
No Events - Enables (Report Events) or disables (No
Events) the reporting of events from channel
DA07 to the SCS
EventMask I3 No Events,
Report Events
No Events - Enables (Report Events) or disables (No
Events) the reporting of events from channel
DA08 to the SCS
EventMask I4 No Events,
Report Events
No Events - Enables (Report Events) or disables (No
Events) the reporting of events from channel
DA09 to the SCS
EventMask I5 No Events,
Report Events
No Events - Enables (Report Events) or disables (No
Events) the reporting of events from channel
DA10 to the SCS
EventMask U No Events,
Report Events
No Events - Enables (Report Events) or disables (No
Events) the reporting of events from channel
DA11 to the SCS
Parameter Range Default Unit Description