ABB Relion 670 series - Troubleshooting Central Account Management

REX060 connections
Table 11: Power X11
No
Signal
1 Ready, Power off NO binary out
2 Power off common binary out
3 Fail, Power off NC binary out
4 Power input positive
5 Power input negative
Table 12: Stator IED and sense connection X61
No Signals
1 Block injection, 220 V binary in
2 Block injection, 110 V binary in
3 Block injection, 48 V binary in
4 Block injection, Common binary in
5 Injection Blocked NC binary out
6 Voltage/Current Saturation NO binary out
7 Common binary out
8 Voltage A, analog out
9 Voltage B analog out
10 Current A analog out
11 Current B analog out
12 Voltage sense A
13 Voltage sense B
14 Current sense A (same as 16)
15 Current sense B
16 Current sense A (same as 14)
17 -
18 -
Table 13: Stator injection connection X62
No
Signal
1 Injection, via extern shunt resistor
2 Injection return, via extern shunt resistor
3 Injection
4 Injection return (same as 5)
5 Injection return (same as 4)
Section 6 1MRK 514 026-UEN B
Connecting
66 670 series 2.2 IEC
Installation manual