ABB SACE Emax 2 - Mechanical Status Indicators

ABB | SACE Emax 2
Emax E1.2 circuit-breakers | 4 - Description
17 | © 2014 ABB | 1SDH000999R0002 - L8569
Mechanical status indicators
The following are the possible states in which you can find the circuit-breaker during its use:
1. Circuit-breaker open with springs discharged (see Figure 25).
2. Circuit-breaker open with springs loaded (see Figure 26).
3. Circuit-breaker closed with springs discharged (see Figure 27).
4. Circuit-breaker closed with springs loaded (see Figure 28). This state occurs when after closing (see
step 4 - Figure 28) the springs are reloaded manually or automatically by the gearmotor (if provided).
Figure 25 Figure 26 Figure 27
Figure 28