ABB SACE Emax 2 - Ekip Com Actuator Module; Description; Connections; Compatibility

ABB | SACE Emax 2
66 | © 2014 ABB | 1SDH000999R0002 - L8569
Electronic accessories | 3 - Ekip Com Actuator module
3 - Ekip Com Actuator module
Description
Ekip Com Actuator is an accessory module that allows the SACE Emax 2 circuit-breakers to be opened and
closed remotely.
Connections
C2
C3
YC
C12
C13
YO
C1 C11
Ekip Com Actuator is installed on the front of the circuit-breaker in the accessories area.
Information on the assembly is available from the web site http://www.abb.com/abblibrary/DownloadCenter/,
in particular with the kit sheet 1SDH000999R0501.
Wiring diagrama are provided below for the module:
S43
C13
C13
C13
+
~
SO
~
-
C12
C12
C12
YO
C11
C11
C11
76
XB4 1
XB4 2
K51
YO
K51
7XK7
XK7
8
Ekip Com Actuator
A4
X
XV
X
XV
A1
A4
78
C1
C1
C1
YC
C2
C2
C2
-
~
SC
~
+
C3
C3
C3
S43
XB3 1
XB3
2
K51
YC
K51
9XK7
XK7
10
Ekip Com Actuator
Diagrams 78 - 76
Further information is available on page 58, or on the site http://www.abb.com/abblibrary/DownloadCenter/,
where the wiring diagram is available 1SDM000091R0001.
Compatibility
Ekip Com Actuator module is supplied on request and is compatible with all Ekip releases if there is an Ekip
Com or Ekip Link module present.