ABB | SACE Emax 2
84 | © 2014 ABB | 1SDH000999R0002 - L8569
Mechanical accessories | 1 - Mechanical Protection accessories
HTC / LTC: Terminal-covers
Terminal-covers are applied in order to reduce the risk of direct contact with live parts. They are available in
two types:
• HTC - High terminal-covers
• LTC - Low terminal-covers
Information on assembly is available at the web site http://www.abb.com/abblibrary/DownloadCenter/, in
particular with the sheets kit:
• 1SDH000999R0612 for the high terminal-covers
• 1SDH000999R0613 for the low terminal-covers
PB: Phase separators
The phase separators are applied in order to increase the insulation clearance between two adjacent phases.
Information on the assembly is available from the web site http://www.abb.com/abblibrary/DownloadCenter/,
in particular with the kit sheet 1SDH000999R0608.
To Next Page
Loading...
