ABB | SACE Emax 2
Emax E1.2 circuit-breakers | 6 - Installation
27 | © 2014 ABB | 1SDH000999R0002 - L8569
Reversal of the position of the
vertical/horizontal terminals
If the circuit-breaker is supplied equipped with terminals of the horizontal/rear type, it is possible at any
moment to switch from horizontal to vertical and vice versa. (see Figure 61 and Figure 62). Lock the screws
with Tightening torque 20 Nm - 177 lb in.
Figure 61
Figure 62
To Next Page
Loading...
