ABB SACE Emax 2 - Installation

ABB | SACE Emax 2
Interface and menus | 4 - Menu21 | © 2019 ABB | 1SDH001316R1002 - ECN000086501 - Rev. A
Measurements Menu
Menu Submenus Description
Historicals
Trip TRIP list
Events List of events recorded
Measurements Minimum and maximum currents recorded
Power factor
(1)
- Power factor measurement
Frequency
(1)
- Frequency measured
Energy
(1)
Energy counters Measurement of energies
Reset counters Meter reset command
Energy RESET Energy reset command
Peak factor
(1)
- Peak factor of each phase
Harmonic dist. -
Activation command for current harmonic
distortion monitoring
Ekip Synchrocheck
(2)
- Measurements associated with module
Network Analyzer
(3)
V Sequences
Measurements associated with Network Analyzer
function: list and description in dedicated chapter
3s V Sequences
THD Current
THD Voltages
Counters
Waveforms
Maintenance
Contact Wear
Installation and maintenance dates and
commands
LastServiceContactWear
Installation
Last Maintenance
Service RESET
(1)
available if provided for by Trip unit model or if SW Measuring Measurements package has been activated
(2)
available when Ekip Synchrocheck module is present
(3)
available if provided for by Trip unit model or if Network Analyzer SW package has been activated