SM500F
Field mountable paperless recorder 7 Configuration
IM/SM500F Rev. Z 111
OR
Note. Digital totalizers only.
Set the required totalizer count rate.
A digital totalizer pulse can be scaled to represent a value of between
0.00001 and 1000.00000. The totalizer is then incremented by this
amount each time there is an off/on transition.
Example – a count of 5 digital pulses with 'Count rate' set to 100
increments the totalizer from 0 to 500 in 100 unit steps.
Off
t
1minute
Input Signal
0
500
t
Units
1minute
Totalizer Value
400
300
200
100
On
To Next Page
Loading...
