SM500F
Field mountable paperless recorder 7 Configuration
IM/SM500F Rev. Z 69
7.4 Overview of Configuration
Referring to Fig. 7.4, configure the recorder as follows:
a Select 'Common' from the Configuration menu.
b Select the parameter required using the and keys.
c Press the key to edit selected parameter.
d Use the and keys to select the next required tab.
e Press the key to display the menu. Select the next item required and activate using the key.
f When all configuration changes are complete, select 'Exit' to save or cancel changes.
Note. Only enabled Process Groups (and their associated Channel Options) and enabled
software options (i.e. Math and Logic) are visible in the menu.
Fig. 7.4 Overview of Configuration Steps
To Next Page
Loading...
