SM500F
Field mountable paperless recorder 7 Configuration
124 IM/SM500F Rev. Z
7.10.5 RS485 (Modbus™) Communications
Refer to Appendix B, page 148 for further information on using the Modbus link.
Note. This Section is applicable only if the optional Modbus/Digital Input module is fitted.
Set a unique Modbus Address (between 1 and 31) to enable the host
system to identify the instrument on a Modbus link.
Note. Maximum 31 slaves per loop.
Set to the Baud rate used by the host system: 1200, 2400, 4800, 9600,
19200, 38400, 115200.
Set to the Parity used by the host system: None, Odd, Even.
To Next Page
Loading...
