SM500F
Field mountable paperless recorder 2 Installation
20 IM/SM500F Rev. Z
2.6 Power Supply Connections
Compensating Cable
BS1843 ANSI MC 96.1 DIN 43714 BS4937 Part No.30
Thermocouple Type + – Case + – Case + – Case + – Case
Ni-Cr/Ni-Al (K) Brown Blue Red Yellow Red Yellow Red Green Green Green White Green *
Ni-Cr/Cu-Ni (E) – – – Violet White Violet *
Nicrisil/Nisil (N) Orange Blue Orange Orange Red Orange – Pink White Pink *
Pt/Pt-Rh (R and S) White Blue Green Black Red Green Red White White Orange White Orange *
Pt-Rh/Pt-Rh (B) – – – Grey White Grey *
Cu/Cu-Ni (T) White Blue Blue Blue Red Blue Red Brown Brown Brown White Brown *
Fe/Con (J) Yellow Blue Black White Red Black Red Blue Blue Black White Black *
* Case Blue for intrinsically safe circuits
Fe/Con (DIN 43710) – –
DIN 43710
–
Blue/red Blue Blue
Table 2.1 Thermocouple Compensating Cable
Fig. 2.11 Power Supply Connections
Note. Power supply terminal screws must be tightened to a torque of 0.8 Nm (7 lbf.in).
90 V min. to 264 V max. 50/60 Hz
10 V min. to 36 V max. DC
To Next Page
Loading...
