SM500F
Field mountable paperless recorder Appendix F – Batch Recording
178 IM/SM500F Rev. Z
F.4.2 Configuring Batch Access Privileges
To enable operators to manually control batches, access Common Configuration (see Section 7.6.5,
page 80) and select the 'User ' tab.
Select 'User 1 Access'.
Ensure the 'Batch' field is ticked to allow User 1 to start and stop batches
– see Section F.3, page 174.
Repeat as required for other Users.
Refer to page 179 to set the required type of batch recording security.
To Next Page
Loading...
