SM500F
Field mountable paperless recorder 7 Configuration
IM/SM500F Rev. Z 83
7.6.6 Operator Messages
Operator messages can be triggered via the Operator menus or a digital
signal.
Message Tag
Enter the message text – 20 characters maximum.
Source ID
Select a signal source used to add the Operator Message to the Alarm
Event log. refer to Appendix A, page 146 for a description of the available
sources.
Note. This signal is edge-triggered. A rising edge (inactive to active) or a
falling edge (active to inactive) triggers the addition of the Operator
Message to the Alarm Event log.
Assign to group 1/Assign to group 2
Select the group(s) to which the message is to apply.
To Next Page
Loading...
