SM500F
Field mountable paperless recorder 7 Configuration
82 IM/SM500F Rev. Z
Set access privileges for selected user.
e-Sign – The selected user is able to enter an electronic
signature.
Logging – The selected user is able to access the Logging
level.
Batch – The selected user is able to start and stop batch
recording – see Appendix F.3, page 174.
Configuration (No access)
– The selected user is unable to access the
Configuration level.
Config (Load) – The selected user is unable to make any
configuration changes but can load
configurations from external media.
Configuration (Ltd) – The selected user is able to:
• Change alarm trip points, hysteresis and time
hysteresis settings.
• Make input adjustments for analog input
boards.
• Load configurations from external media only.
Configuration (Full) – The selected user is allowed full configuration
access with the exception of access to the
Security settings.
Alarm acknowledge – The selected user is able to acknowledge
alarms.
Note. The System Administrator (User 1) only is able to change the
Security settings.
Enter an initial password for the selected user.
Note. The user may subsequently change this password.
To Next Page
Loading...
