SM500F
Field mountable paperless recorder 7 Configuration
IM/SM500F Rev. Z 81
Note. The following parameters are displayed only if 'Security system' is set to 'Advanced' – see
Section 7.6.4, page 78.
Configure User 1 (System Administrator)
Note. Full Configuration level access privileges for User 1 cannot be
disabled.
Select e-Sign, Logging, Batch (see Appendix F, page 173) and Alarm
acknowledge access privileges as required (see also page 82).
The System Administrator (User 1) can view and/or change the user
name, access privileges and password for any other user. Select the user
to be viewed/edited.
Enter a name for the selected user.
To Next Page
Loading...
