SM500F
Field mountable paperless recorder 7 Configuration
IM/SM500F Rev. Z 121
The FTP User name and password are used during logon to enable the
FTP server. Access for up to four different users is provided. These
passwords can also be used to allow access to some functionality
provided by the web server.
Enter a name and password for the user granted FTP access.
Select an FTP access level for the user:
Full – user can read, write and delete files
Read-only – user can read files only.
Select an access level for Remote Operation by the user:
Configuration – user can change the time & date or load a new
configuration into the recorder from a web browser.
This is in addition to the operator functions.
Operator – user can acknowledge alarms and start, stop and
reset totalizers from a web browser.
None – user cannot log on to the recorder from a web
browser.
Note. If a user is given full access via FTP, that user is able to delete both
data and configuration files. This could result in erroneous operation of the
recorder.
To Next Page
Loading...
