SM500F
Field mountable paperless recorder 7 Configuration
128 IM/SM500F Rev. Z
Note. Displayed only if 'Protocol' is set to 'TCP' or 'RTU'.
Select the format of the data to be read from the slave device:
Sint16 – signed, 16 bit integer
Sint32 – signed, 32 bit integer, transmitted in high/low order
rev. Sint32 – signed, 32 bit integer, transmitted in low/high order
IEEE – 32 bit floating point number, transmitted in high/low
order
Rev. IEEE – 32 bit floating point number, transmitted in low/high
order
To Next Page
