SM500F
Field mountable paperless recorder 5 Logging
48 IM/SM500F Rev. Z
Fig. 5.2 Accessing Logging – Advanced Security
Note. If an incorrect password is entered the display returns to the Operating view. However, if the
maximum number of consecutive incorrect password entries is exceeded, the user's access privileges
are removed and the following message is displayed:
If this occurs, access privileges can be reinstated only by the system administrator (User 1). If the system
administrator's access privileges have been removed, the security system must be disabled using the
configuration security switch to gain access to the configuration.
Enter Password
(see Section 5.1.1, page 49)
Logging
Security
Enabled
Logging Security
Not Enabled
Invalid Password
Entered
(See Note below)
Valid Password
Entered
To Next Page
Loading...
