SM500F
Field mountable paperless recorder 7 Configuration
IM/SM500F Rev. Z 95
Select the type of scale displayed in the Chart view and the format of the
current value readings displayed in both Chart and Indicator views.
Linear – normal linear scale displayed in the Chart view; normal
current value readings displayed in both Chart and Indicator
views.
Log – logarithmic scale displayed in the Chart view; current value
readings displayed in exponential format. For example,
2.4E+4 (2.4 x 10
+4
) is displayed in both Chart and Indicator
views.
Note.
For further information on the use of this feature, refer to
Appendix E.4, page 172.
The following parameters are displayed only if this parameter is set
to 'Log'.
Select the lower limit of the log decade range to be displayed on the Chart
view scale – refer to Appendix E.4, page 172.
Select the upper limit of the log decade range to be displayed on the
Chart view scale – refer to Appendix E.4, page 172.
To Next Page
Loading...
