Operation Manual / TPS48-D/E.. - TPS61-D/E..
Page 94
© Copyright 2016 ABB. All rights reserved.
September 2016 HZTL2410_EN Revision E
Before beginning work, ensure that the required customer spare parts
sets are available.
See chapter Spare parts.
When disassembling the turbocharger, a fitted oil orifice must not be
removed.
Tightening torques for turbocharger components
The specified tightening torques of screw connections for turbocharger
components must be observed. (See section Table of tightening torques.)
Tightening torques for assembly devices of ABB Turbo Systems
If nothing else is described, the screws and nuts of the assembly devices
must be tightened down firmly.
To Next Page
Loading...