Operation Manual / TPS48-D/E.. - TPS61-D/E..
Page 95
© Copyright 2016 ABB. All rights reserved.
September 2016 HZTL2410_EN Revision E
Loads not suspended in compliance with regulations may lead to per-
sonal injury or accidents with fatal consequences.
Attach turbochargers, assemblies or individual components only to
lifting gear which is in technically perfect condition and has sufficient
load capacity.
Make sure the load is suspended properly on the crane hook.
Do not let anyone stand beneath a suspended load.
Wear safety gloves to protect against mechanical hazards.
Wear safety helmet.
Defined load carrying point on a component or an assembly (blind hole
thread, eye, lug).
Devices mounted on the turbocharger to create a suspension point.
Assembly devices are calculated and designed especially for the de-
fined application. They are not commercially available products. Use
assembly / fitting devices only for the applications described.
Equipment for lifting and transporting loads (ropes, chain hoists,
cranes). Lifting gear is not supplied by ABB Turbo Systems.
To Next Page
Loading...
Need help?
General
