ABB VTR184-11 - Page 109

Turbocharger VTR..4 Seite / Page 1
Demontage und Montage Kap. / Chap. 5 Disassembly and assembly
ABB Turbo Systems Ltd
HZTL 10020
- M -
Volume: 53 pages
Edition: 10 / 2015

Inhalt
1 Einleitung .................................................3
2 Gewichte ..................................................5
3 Turbolader abbauen
und anbauen ............................................9
4 Lager ausbauen
und einbauen ......................................... 11
4.1 Verdichterseitiges Lager
ausbauen ............................................... 11
4.2 Turbinenseitiges Lager ausbauen .......... 17
4.3 Turbinenseitiges Lager einbauen ........... 23
4.4 Verdichterseitiges Lager einbauen .........31
4.5 Masse K, K1, K2,
Spiele L und M .......................................39
5 Rotor ausbauen und einbauen ...............41
5.1 Rotor ausbauen .....................................41
5.2 Turbinenschaufeln ersetzen ................... 45
5.3 Verdichter wechseln ...............................45
5.4 Rotor einbauen ......................................45
6 Düsenring ersetzen ................................47
7 Heben Gasaustrittsgehäuse .................48
8 Reserveteile ...........................................50
9 Tabelle der Anziehmomente ...................53
5
Demontage
und Montage
5
Disassembly
and assembly
Contents
1 Introduction ..............................................3
2 Weights ....................................................5
3 Removing and installing
the turbocharger ....................................... 9
4 Removing and installing
the bearings ........................................... 11
4.1 Removing the
compressor end bearing ........................ 11
4.2 Removing the turbine end bearing .........17
4.3 Installing the turbine end bearing ...........23
4.4 Installing the compressor end bearing ...31
4.5 Dimensions K, K1, K2,
clearances L and M ................................ 39
5 Removing and installing the rotor ..........41
5.1 Removing the rotor.................................41
5.2 Replacing the turbine blades .................45
5.3 Replacing the compressor .....................45
5.4 Installing the rotor...................................45
6 Replacing the nozzle ring ....................... 47
7 Lifting gas outlet casing .........................48
8 Reserve parts ......................................... 50
9 Table of tightening torques .....................53