3. Remove the magnet, replace the keeper bar, and store the magnet.3.
CAUTION: Do not use the magnet around magnecally sensive items to avoid damaging them.
Using the EPG
Read this secon for direcons for use related to the EPG and EPG header. For direcons for use of other
system components not covered in this document, see the clinician’s manual for the appropriate device.
NOTE: Well in advance of the surgical procedure, set up communicaon between the EPG and the
programmer and controller to ensure it is funconal. Refer to “Seng Up Communicaon Between the
EPG and the Clinician Programmer or Paent Controller” (page 17) for instrucons.
CAUTION: Before the EPG or associated components are used or secured to the paent, determine if a
paent may have an allergic reacon to the materials.
Compability Guidelines
The following table lists the trial cable and leads compable with the EPG. For more informaon on these
components, refer to the applicable clinician's manual.
Table 1. Trial cable and leads compable with the EPG
Device Model Number
Mullead trial cable 3013
Percutaneous trial leads 3046, 3066, 3086
20