Abbott 3599 - Securing EPG to Patient

Figure 10. Insert the lead or extension fully into the EPG header
1. Fully inserted1.
2. Not fully inserted2.
4.
Release the buon to lock the lead or extension into place.
4.
5.
If applicable, repeat the previous steps to insert the remaining lead or extension. Do not disturb the
5.
already inserted lead or extension.
Securing the EPG
To secure the EPG to the paent:
1.
Place the EPG into the provided pouch.
1.
2.
Remove the adhesive liner on the pouch ap.
2.
26