Abbott 3599 - EPG Cleaning and Storage; Cleaning the EPG; Storing and Transporting the EPG

▪ Do not put heavy or sharp objects on the EPG.▪
▪
Keep the EPG away from food and beverages, and avoid geng the EPG wet.
▪
▪ If the EPG does get wet, do not use it. Contact Technical Support for help.▪
Cleaning the EPG
▪
Using two PDI Sani-Cloths, wipe the EPG for 2 minutes front and back, then allow to air dry. Once the
▪
EPG is dry, aach the header cap.
NOTE: Clean the EPG before aaching the header cap.
▪ Clean the EPG by thoroughly wiping o its outer surface using the provided cleaning cloths. Do not wipe
▪
over the smulator port. Do not submerge the EPG in uid or use a cloth that is soaking wet.
▪
Never use ammonia, acidic, or alkaline cleaners or organic chemicals such as paint thinner, acetone,▪
propyl alcohol, or kerosene. They may damage surface nishes of the EPG.
Storing and Transporng the EPG
▪ Store the EPG and baeries in a cool, dry place. Do not store the EPG or baeries in your car or garage.▪
▪
Transport the EPG in a carrying case.
▪
▪ If you are carrying the EPG in a briefcase or other carrying case, make sure no objects in the case are▪
pressing on the device.
▪ Store paired EPGs and paent controllers together to reduce the number of mes you need to set up▪
communicaon.
28