Abbott Endurity Core - Device Description

Device Descripon
This manual describes the Abbo Medical pulse generators listed in the table below.
These devices can be programmed with Merlin™ Paent Care System operang with soware version 21.2.2
(or greater) or the Merlin™ 2 Paent Care System operang with soware version 1.1.2 (or greater). For
informaon on programming, refer to the programmer's on‑screen help.
CAUTION: Not all device models are available in all countries.
Not all of the products listed as MR Condional are approved for MR Condional use in all countries or
regions.
Before performing an MRI scan on paents implanted with any of these devices, contact
Abbo Medical
or consult your regulatory authories to determine if the products have been cered as
MR Condional.
Table 1. Pulse generator descripons
Name Model Number Descripon Connector Type MRI Status
Endurity™ Core
PM1140 Single‑chamber
pulse generator
IS‑1 MR Condional
Endurity™ Core
PM1152 Single‑chamber
pulse generator
IS‑1 MR Condional
Endurity™
PM1162 Single‑chamber
pulse generator
IS‑1 MR Condional
1