Abbott Endurity Core - Programming Guidelines

NOTES:
▪ When connecng leads to the pulse generator, make sure that you plug the correct lead into the correct▪
lead receptacle. For sensing and pacing, this is important to ensure that atrial and ventricular signals are
correctly recorded and that pacing pulses are delivered in the desired chamber.
▪ The IS4‑LLLL lead receptacle can only be used with IS4‑LLLL le heart leads.▪
Programming Guidelines
For a list of all programmable parameters and sengs, refer to the programmer's on‑screen help.
Removing a Magnet
To interrogate the device, remove the magnet from the programmer telemetry wand. A magnet will interfere
with proper telemetry.
Temporary Programming
These devices feature Temporary Programming to aid the clinician in diagnosing and treang the paent. The
clinician can temporarily program parameters to assess their eects with the ability to quickly cancel or
permanently program the seng. For more informaon, refer to the programmer's on‑screen help.
Preset Programmed Sengs
Shipped Sengs
The device's parameter sengs are preset when the device is manufactured. For addional informaon, refer
to the programmer's on‑screen help.
29